If you think a check is flawed or have an idea for a check, please file an issue at https://github.com/fonttools/fontbakery/issues and remember to include a pointer to the repo and branch you're checking.
Summary
💥 ERROR | 🔥 FAIL | ⚠️ WARN | ⏩ SKIP | ℹ️ INFO | ✅ PASS |
---|---|---|---|---|---|
0 | 17 | 13 | 70 | 8 | 133 |
0% | 10% | 7% | 39% | 4% | 75% |
Note: The following loglevels were omitted in this report: SKIP, INFO, PASS, DEBUG
Meaning of check results:
- 💥 An ERROR is something wrong with FontBakery itself, possibly a bug.
- 🔥 A FAIL is a problem with the font that must be fixed.
- ⚠️ A WARN is something that you should consider addressing.
- ℹ️ An INFO result simply prints something useful. Typically stats.
- ✅ A PASS means the font looks good for the given checking routine.
- ⏩ And a SKIP happens when the check does not apply to the given font.
If you get ERRORs, please help us improve the tool by reporting them at our issue tracker.
(but other kinds of bug reports and/or feature requests are also always welcome, of course!)
FontBakery version: 0.9.2
Section: Google Fonts
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥⚠️⚠️⚠️⚠️⚠️⚠️⚠️⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩ℹ️ℹ️ℹ️ℹ️ℹ️ℹ️Does font file include unacceptable control character glyphs?
🔥 Family check
- 🔥 FAIL
The following unacceptable control characters were identified: /Users/simon/others-repos/fonts/ofl/trykker/Trykker-Regular.ttf: uni0001, uni0002, uni0003, uni0004, uni0005, uni0006, uni0007, uni0008, uni0009, uni0010, uni0011, uni0012, uni0013, uni0014, uni0015, uni0016, uni0017, uni0018, uni0019 [code: unacceptable]
Check Google Fonts glyph coverage.
🔥 Trykker-Regular.ttf
- 🔥 FAIL
Missing required codepoints:
- 0x0308 (COMBINING DIAERESIS) - 0x0300 (COMBINING GRAVE ACCENT) - 0x0301 (COMBINING ACUTE ACCENT) - 0x030B (COMBINING DOUBLE ACUTE ACCENT) - 0x0304 (COMBINING MACRON) - 0x1E9E (LATIN CAPITAL LETTER SHARP S) - 0x0307 (COMBINING DOT ABOVE) - 0x0302 (COMBINING CIRCUMFLEX ACCENT) - 0x030C (COMBINING CARON) - 0x0306 (COMBINING BREVE) - 0x030A (COMBINING RING ABOVE) - 0x0303 (COMBINING TILDE) - 0x0312 (COMBINING TURNED COMMA ABOVE) - 0x0326 (COMBINING COMMA BELOW) - 0x0327 (COMBINING CEDILLA) - 0x0328 (COMBINING OGONEK)
[code: missing-codepoints]
Check for codepoints not covered by METADATA subsets.
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
- U+0001 : not included in any glyphset definition
- U+0002 : not included in any glyphset definition
- U+0003 : not included in any glyphset definition
- U+0004 : not included in any glyphset definition
- U+0005 : not included in any glyphset definition
- U+0006 : not included in any glyphset definition
- U+0007 : not included in any glyphset definition
- U+0008 : not included in any glyphset definition
- U+0009 : not included in any glyphset definition
- U+0010 : not included in any glyphset definition
- U+0011 : not included in any glyphset definition
- U+0012 : not included in any glyphset definition
- U+0013 : not included in any glyphset definition
- U+0014 : not included in any glyphset definition
- U+0015 : not included in any glyphset definition
- U+0016 : not included in any glyphset definition
- U+0017 : not included in any glyphset definition
- U+0018 : not included in any glyphset definition
- U+0019 : not included in any glyphset definition
- U+02C7 CARON: try adding one of: canadian-aboriginal, tifinagh
- U+02D8 BREVE: try adding canadian-aboriginal
- U+02D9 DOT ABOVE: try adding canadian-aboriginal
- U+02DB OGONEK: try adding canadian-aboriginal
- U+02DD DOUBLE ACUTE ACCENT: not included in any glyphset definition
- U+0394 GREEK CAPITAL LETTER DELTA: try adding greek
- U+03A9 GREEK CAPITAL LETTER OMEGA: try adding greek
- U+03BC GREEK SMALL LETTER MU: try adding greek
- U+03C0 GREEK SMALL LETTER PI: try adding greek
- U+2021 DOUBLE DAGGER: not included in any glyphset definition
- U+2030 PER MILLE SIGN: not included in any glyphset definition
- U+2126 OHM SIGN: not included in any glyphset definition
- U+2202 PARTIAL DIFFERENTIAL: not included in any glyphset definition
- U+2206 INCREMENT: not included in any glyphset definition
- U+220F N-ARY PRODUCT: not included in any glyphset definition
- U+2211 N-ARY SUMMATION: not included in any glyphset definition
- U+221A SQUARE ROOT: not included in any glyphset definition
- U+221E INFINITY: not included in any glyphset definition
- U+222B INTEGRAL: not included in any glyphset definition
- U+2248 ALMOST EQUAL TO: not included in any glyphset definition
- U+2260 NOT EQUAL TO: not included in any glyphset definition
- U+2264 LESS-THAN OR EQUAL TO: not included in any glyphset definition
- U+2265 GREATER-THAN OR EQUAL TO: not included in any glyphset definition
- U+25CA LOZENGE: not included in any glyphset definition
- U+FB00 LATIN SMALL LIGATURE FF: not included in any glyphset definition
- U+FB01 LATIN SMALL LIGATURE FI: not included in any glyphset definition
- U+FB02 LATIN SMALL LIGATURE FL: not included in any glyphset definition
Or you can add the above codepoints to one of the subsets supported by the font:
menu
,latin
,latin-ext
[code: unreachable-subsetting]
Check license file has good copyright string.
🔥 Trykker-Regular.ttf
- 🔥 FAIL
First line in license file is:
"copyright (c) 2011 by sorkin type co (www.sorkintype.com),"
which does not match the expected format, similar to:
"Copyright 2022 The Familyname Project Authors (git url)" [code: bad-format]
Check copyright namerecords match license file.
🔥 Trykker-Regular.ttf
- 🔥 FAIL
License file OFL.txt exists but NameID 13 (LICENSE DESCRIPTION) value on platform 1 (MACINTOSH) is not specified for that. Value was: "This Font Software is licensed under the SIL Open Font License, Version 1.1." Must be changed to "This Font Software is licensed under the SIL Open Font License, Version 1.1. This license is available with a FAQ at: https://scripts.sil.org/OFL" [code: wrong]
- 🔥 FAIL
License file OFL.txt exists but NameID 13 (LICENSE DESCRIPTION) value on platform 3 (WINDOWS) is not specified for that. Value was: "This Font Software is licensed under the SIL Open Font License, Version 1.1." Must be changed to "This Font Software is licensed under the SIL Open Font License, Version 1.1. This license is available with a FAQ at: https://scripts.sil.org/OFL" [code: wrong]
METADATA.pb subsets should be alphabetically ordered.
🔥 Trykker-Regular.ttf
- 🔥 FAIL
METADATA.pb subsets are not sorted in alphabetical order: Got ['menu', 'latin', 'latin-ext'] and expected ['latin', 'latin-ext', 'menu'] [code: not-sorted]
Copyright notices match canonical pattern in METADATA.pb
🔥 Trykker-Regular.ttf
- 🔥 FAIL
METADATA.pb: Copyright notices should match a pattern similar to: "Copyright 2020 The Familyname Project Authors (git url)" But instead we have got: "copyright (c) 2011, sorkin type co (www.sorkintype.com eben@eyebytes.com) with reserved font name "trykker"." [code: bad-notice-format]
Copyright notices match canonical pattern in fonts
🔥 Trykker-Regular.ttf
- 🔥 FAIL
Name Table entry: Copyright notices should match a pattern similar to: "Copyright 2019 The Familyname Project Authors (git url)" But instead we have got: "Copyright (c) 2011, Sorkin Type Co (www.sorkintype.com) with Reserved Font Name "Trykker"." [code: bad-notice-format]
- 🔥 FAIL
Name Table entry: Copyright notices should match a pattern similar to: "Copyright 2019 The Familyname Project Authors (git url)" But instead we have got: "Copyright (c) 2011, Sorkin Type Co (www.sorkintype.com) with Reserved Font Name "Trykker"." [code: bad-notice-format]
Copyright notice on METADATA.pb should not contain 'Reserved Font Name'.
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
METADATA.pb: copyright field ("Copyright (c) 2011, Sorkin Type Co (www.sorkintype.com eben@eyebytes.com) with Reserved Font Name "Trykker".") contains "Reserved Font Name". This is an error except in a few specific rare cases. [code: rfn]
Copyright field for this font on METADATA.pb matches all copyright notice entries on the name table ?
🔥 Trykker-Regular.ttf
- 🔥 FAIL
Copyright field for this font on METADATA.pb ("Copyright (c) 2011, Sorkin Type Co (www.sorkintype.com eben@eyebytes.com) with Reserved Font Name "Trykker".") differs from a copyright notice entry on the name table: "Copyright (c) 2011, Sorkin Type Co (www.sorkintype.com) with Reserved Font Name "Trykker"." [code: mismatch]
- 🔥 FAIL
Copyright field for this font on METADATA.pb ("Copyright (c) 2011, Sorkin Type Co (www.sorkintype.com eben@eyebytes.com) with Reserved Font Name "Trykker".") differs from a copyright notice entry on the name table: "Copyright (c) 2011, Sorkin Type Co (www.sorkintype.com) with Reserved Font Name "Trykker"." [code: mismatch]
Font enables smart dropout control in "prep" table instructions?
🔥 Trykker-Regular.ttf
- 🔥 FAIL
The 'prep' table does not contain TrueType instructions enabling smart dropout control. To fix, export the font with autohinting enabled, or run ttfautohint on the font, or run the
gftools fix-nonhinting
script. [code: lacks-smart-dropout]
Name table strings must not contain the string 'Reserved Font Name'.
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
Name table entry contains "Reserved Font Name" for a family name ("Trykker") that differs from the currently used family name (Trykker), which is fine. [code: legacy-familyname]
- ⚠️ WARN
Name table entry contains "Reserved Font Name" for a family name ("Trykker") that differs from the currently used family name (Trykker), which is fine. [code: legacy-familyname]
A static fonts directory with at least two fonts must accompany variable fonts
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
Please consider adding a subdirectory called "static/" and including in it static font files. [code: missing]
Ensure METADATA.pb does not use escaped strings.
🔥 Trykker-Regular.ttf
- 🔥 FAIL
Found escaped chars at 'Copyright (c) 2011, Sorkin Type Co (www.sorkintype.com eben@eyebytes.com) with Reserved Font Name '. Please use an unicode string instead. [code: escaped-strings]
On a family update, the DESCRIPTION.en_us.html file should ideally also be updated.
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
The DESCRIPTION.en_us.html file in this family has not changed in comparison to the latest font release on the google/fonts github repo. Please consider mentioning note-worthy improvements made to the family recently. [code: description-not-updated]
OS/2.fsSelection bit 7 (USE_TYPO_METRICS) is set in all fonts.
🔥 Trykker-Regular.ttf
- 🔥 FAIL
OS/2.fsSelection bit 7 (USE_TYPO_METRICS) wasNOT set in the following fonts: ['/Users/simon/others-repos/fonts/ofl/trykker/Trykker-Regular.ttf']. [code: missing-os2-fsselection-bit7]
Ensure fonts have ScriptLangTags declared on the 'meta' table.
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
This font file does not have a 'meta' table. [code: lacks-meta-table]
Ensure fonts do not contain any pre-production tables.
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
This font file contains the following pre-production tables: FFTM [code: has-debugging-tables]
Section: Universal
🔥🔥🔥🔥🔥🔥⚠️⚠️⚠️⚠️⚠️⏩⏩⏩⏩⏩⏩ℹ️ℹ️Checking OS/2 usWinAscent & usWinDescent.
🔥 Trykker-Regular.ttf
- 🔥 FAIL
OS/2.usWinAscent value should be equal or greater than 2027, but got 2022 instead [code: ascent]
- 🔥 FAIL
OS/2.usWinDescent value should be equal or greater than 539, but got 538 instead [code: descent]
Font contains '.notdef' as its first glyph?
🔥 Trykker-Regular.ttf
- 🔥 FAIL
The '.notdef' glyph should contain a drawing, but it is blank. [code: notdef-is-blank]
Font has **proper** whitespace glyph names?
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
Glyph 0x00A0 is called "nonbreakingspace": Change to "uni00A0" [code: not-recommended-00a0]
Are there unwanted tables?
🔥 Trykker-Regular.ttf
- 🔥 FAIL
The following unwanted font tables were found:
- FFTM - Table contains redundant FontForge timestamp info
They can be removed with the 'fix-unwanted-tables' script provided by gftools. [code: unwanted-tables]
Check font contains no unreachable glyphs
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
The following glyphs could not be reached by codepoint or substitution rules:
- cedilla.cap - commaaccent.cap - nonmarkingreturn
[code: unreachable-glyphs]
Check if each glyph has the recommended amount of contours.
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:
- Glyph name: uni00AD Contours detected: 1 Expected: 0 - Glyph name: daggerdbl Contours detected: 2 Expected: 1 or 3 - Glyph name: daggerdbl Contours detected: 2 Expected: 1 or 3 - Glyph name: uni00AD Contours detected: 1 Expected: 0
[code: contour-count]
Does the font contain a soft hyphen?
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
This font has a 'Soft Hyphen' character. [code: softhyphen]
Ensure component transforms do not perform scaling or rotation.
🔥 Trykker-Regular.ttf
- 🔥 FAIL
The following glyphs had components with scaling or rotation or inverted outline direction:
- braceright (component braceleft)
- exclamdown (component exclam)
- greaterequal (component lessequal) [code: transformed-components]
Space and non-breaking space have the same width?
🔥 Trykker-Regular.ttf
- 🔥 FAIL
Space and non-breaking space have differing width: The space glyph named space is 682 font units wide, non-breaking space named (nonbreakingspace) is 481 font units wide, and both should be positive and the same. GlyphsApp has "Sidebearing arithmetic" (https://glyphsapp.com/tutorials/spacing) which allows you to set the non-breaking space width to always equal the space width. [code: different-widths]
Check math signs have the same width.
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
The most common width is 1194 among a set of 8 math glyphs. The following math glyphs have a different width, though:
Width = 1193: less, greater, greaterequal, lessequal
Width = 1060: minus [code: width-outliers]
Check accent of Lcaron, dcaron, lcaron, tcaron (derived from com.google.fonts/check/alt_caron)
🔥 Trykker-Regular.ttf
- 🔥 FAIL
dcaron uses component comma. [code: bad-mark]
- 🔥 FAIL
Lcaron uses component comma. [code: bad-mark]
- 🔥 FAIL
lcaron uses component comma. [code: bad-mark]
- 🔥 FAIL
tcaron uses component comma. [code: bad-mark]
Section: fontbakery.profiles.os2
⚠️⏩Check if OS/2 xAvgCharWidth is correct.
⚠️ Trykker-Regular.ttf
- ⚠️ WARN
OS/2 xAvgCharWidth is 1197 but it should be 1174 which corresponds to the average of the widths of all glyphs in the font. [code: xAvgCharWidth-wrong]