FontBakery Check Report

If you think a check is flawed or have an idea for a check, please file an issue at https://github.com/fonttools/fontbakery/issues and remember to include a pointer to the repo and branch you're checking.

DEPRECATION WARNING

By late-December 2024, FontBakery version 0.13.0 introduced a new naming scheme for the check-IDs.

Fontbakery detected usage of old IDs and performed an automatic backwards-compatibility translation for you.
This automatic translation will be deprecated in the next major release.

Please start using the new check-IDs as documented at /Lib/fontbakery/legacy_checkids.py

The following legacy check-IDs were detected:
- com.google.fonts/check/ttx_roundtrip
- com.google.fonts/check/outline_jaggy_segments
- com.google.fonts/check/fontdata_namecheck
- com.google.fonts/check/outline_short_segments
- com.google.fonts/check/outline_colinear_vectors
- com.google.fonts/check/version_bump
- com.google.fonts/check/outline_alignment_miss
- com.google.fonts/check/outline_semi_vertical

Summary

💥 ERROR	☠ FATAL	🔥 FAIL	⚠️ WARN	⏩ SKIP	ℹ️ INFO	✅ PASS
5	0	1	16	59	17	359
1%	0%	0%	4%	13%	4%	79%

Meaning of check results:

💥 An ERROR is something wrong with FontBakery itself, possibly a bug.
☠ A FATAL is an extremely severe issue that must be addressed immediately.
🔥 A FAIL is a problem with the font that must be fixed.
⚠️ A WARN is something that you should consider addressing.
ℹ️ An INFO result simply prints something useful. Typically stats.
✅ A PASS means the font looks good for the given checking routine.
⏩ And a SKIP happens when the check does not apply to the given font.

If you get ERRORs, please help us improve the tool by reporting them at our issue tracker.

(but other kinds of bug reports and/or feature requests are also always welcome, of course!)

FontBakery version: 0.13.1

Universal Profile Checks

⚠️⚠️⚠️⚠️⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩ℹ️ℹ️ℹ️ℹ️

Check math signs have the same width.

Check ID: <FontBakeryCheck:math_signs_width>

⚠️ BodoniModaSC-Italic[opsz,wght].ttf

⚠️ WARN
The most common width is 1119 among a set of 7 math glyphs. The following math glyphs have a different width, though:

Width = 1059: plus, plusminus

Width = 971: logicalnot

Width = 963: multiply

Width = 934: minus

Width = 1200: approxequal
[code: width-outliers]

⚠️ BodoniModaSC[opsz,wght].ttf

⚠️ WARN
The most common width is 1119 among a set of 7 math glyphs. The following math glyphs have a different width, though:

Width = 1059: plus, plusminus

Width = 971: logicalnot

Width = 963: multiply

Width = 934: minus

Width = 1200: approxequal
[code: width-outliers]

Check there are no overlapping path segments

Check ID: <FontBakeryCheck:overlapping_path_segments>

⚠️ BodoniModaSC-Italic[opsz,wght].ttf

⚠️ WARN

The following glyphs have overlapping path segments:

* .notdef: L<<697.0,751.0>--<655.0,751.0>> has the same coordinates as a previous segment.

* S (U+0053): L<<39.0,391.0>--<78.0,391.0>> has the same coordinates as a previous segment.

* S (U+0053): L<<1109.0,1109.0>--<1070.0,1109.0>> has the same coordinates as a previous segment.

* Sacute (U+015A): L<<39.0,391.0>--<78.0,391.0>> has the same coordinates as a previous segment.

* Sacute (U+015A): L<<1109.0,1109.0>--<1070.0,1109.0>> has the same coordinates as a previous segment.

* Scaron (U+0160): L<<39.0,391.0>--<78.0,391.0>> has the same coordinates as a previous segment.

* Scaron (U+0160): L<<1109.0,1109.0>--<1070.0,1109.0>> has the same coordinates as a previous segment.

* Scedilla (U+015E): L<<39.0,391.0>--<78.0,391.0>> has the same coordinates as a previous segment.

* Scedilla (U+015E): L<<1109.0,1109.0>--<1070.0,1109.0>> has the same coordinates as a previous segment.

* Scircumflex (U+015C): L<<39.0,391.0>--<78.0,391.0>> has the same coordinates as a previous segment.

* Scircumflex (U+015C): L<<1109.0,1109.0>--<1070.0,1109.0>> has the same coordinates as a previous segment.

* uni0218 (U+0218): L<<39.0,391.0>--<78.0,391.0>> has the same coordinates as a previous segment.

* uni0218 (U+0218): L<<1109.0,1109.0>--<1070.0,1109.0>> has the same coordinates as a previous segment.

* eng (U+014B): L<<950.0,639.0>--<761.0,602.0>> has the same coordinates as a previous segment.

* eng.sc: L<<1073.0,739.0>--<884.0,702.0>> has the same coordinates as a previous segment.

* oe.sc: L<<410.0,0.0>--<419.0,39.0>> has the same coordinates as a previous segment.

* oe.sc: L<<637.0,981.0>--<645.0,1020.0>> has the same coordinates as a previous segment.

* four.osf: L<<609.0,39.0>--<609.0,0.0>> has the same coordinates as a previous segment.

* four.tosf: L<<674.0,39.0>--<674.0,0.0>> has the same coordinates as a previous segment.

* asterisk (U+002A): L<<774.0,1040.0>--<734.0,1040.0>> has the same coordinates as a previous segment.

* dagger (U+2020): L<<634.0,500.0>--<362.0,500.0>> has the same coordinates as a previous segment.

* dagger (U+2020): L<<604.0,957.0>--<613.0,996.0>> has the same coordinates as a previous segment.

* dagger (U+2020): L<<628.0,977.0>--<590.0,977.0>> has the same coordinates as a previous segment.

* infinity (U+221E): L<<70.0,731.0>--<271.0,731.0>> has the same coordinates as a previous segment.

* infinity (U+221E): L<<1743.0,731.0>--<1542.0,731.0>> has the same coordinates as a previous segment.

* partialdiff (U+2202): L<<710.0,1520.0>--<692.0,1484.0>> has the same coordinates as a previous segment.

[code: overlapping-path-segments]

⚠️ BodoniModaSC[opsz,wght].ttf

⚠️ WARN

The following glyphs have overlapping path segments:

* eng (U+014B): L<<1012.0,639.0>--<832.0,602.0>> has the same coordinates as a previous segment.

* eng.sc: L<<1161.0,739.0>--<981.0,702.0>> has the same coordinates as a previous segment.

* oe.sc: L<<620.0,0.0>--<620.0,39.0>> has the same coordinates as a previous segment.

* oe.sc: L<<620.0,981.0>--<620.0,1020.0>> has the same coordinates as a previous segment.

* four.osf: L<<760.0,39.0>--<760.0,0.0>> has the same coordinates as a previous segment.

* four.tosf: L<<790.0,39.0>--<790.0,0.0>> has the same coordinates as a previous segment.

* dagger (U+2020): L<<729.0,500.0>--<457.0,500.0>> has the same coordinates as a previous segment.

* dagger (U+2020): L<<593.0,957.0>--<593.0,996.0>> has the same coordinates as a previous segment.

* dagger (U+2020): L<<612.0,977.0>--<574.0,977.0>> has the same coordinates as a previous segment.

* infinity (U+221E): L<<1542.0,731.0>--<1743.0,731.0>> has the same coordinates as a previous segment.

* infinity (U+221E): L<<271.0,731.0>--<70.0,731.0>> has the same coordinates as a previous segment.

* partialdiff (U+2202): L<<569.0,1520.0>--<549.0,1482.0>> has the same coordinates as a previous segment.

[code: overlapping-path-segments]

Article Checks

⚠️⚠️

Validate size, and resolution of article images, and ensure article page has minimum length and includes visual assets.

Check ID: <FontBakeryCheck:googlefonts/article/images>

⚠️ BodoniModaSC-Italic[opsz,wght].ttf

⚠️ WARN
Family metadata at /Users/simon/others-repos/fonts//ofl/bodonimodasc does not have an article.
[code: lacks-article]

⚠️ BodoniModaSC[opsz,wght].ttf

⚠️ WARN
Family metadata at /Users/simon/others-repos/fonts//ofl/bodonimodasc does not have an article.
[code: lacks-article]

Metadata Checks

⚠️⚠️⏩⏩⏩⏩ℹ️ℹ️

Check for codepoints not covered by METADATA subsets.

Check ID: <FontBakeryCheck:googlefonts/metadata/unreachable_subsetting>

⚠️ BodoniModaSC-Italic[opsz,wght].ttf

⚠️ WARN
The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
- U+02D8 BREVE: try adding one of: yi, canadian-aboriginal
- U+02D9 DOT ABOVE: try adding one of: yi, canadian-aboriginal
- U+02DB OGONEK: try adding one of: yi, canadian-aboriginal
- U+0306 COMBINING BREVE: try adding one of: old-permic, tifinagh
- U+030A COMBINING RING ABOVE: try adding one of: syriac, duployan
- U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: osage, cherokee
- U+030C COMBINING CARON: try adding one of: cherokee, tai-le
- U+0311 COMBINING INVERTED BREVE: try adding one of: todhri, coptic
- U+0328 COMBINING OGONEK: not included in any glyphset definition
- U+2000 EN QUAD: try adding symbols2
- U+2001 EM QUAD: try adding symbols2
- U+2003 EM SPACE: try adding nushu
- U+2004 THREE-PER-EM SPACE: try adding symbols2
- U+2005 FOUR-PER-EM SPACE: try adding symbols2
- U+2006 SIX-PER-EM SPACE: try adding symbols2
- U+2007 FIGURE SPACE: try adding symbols2
- U+2008 PUNCTUATION SPACE: try adding symbols2
- U+200A HAIR SPACE: try adding symbols2
- U+2010 HYPHEN: try adding one of: lisu, sundanese, kaithi, kayah-li, syloti-nagri, armenian, yi, sora-sompeng, arabic, kharoshthi, hebrew, cham, coptic
- U+2011 NON-BREAKING HYPHEN: try adding one of: yi, syloti-nagri, arabic
- U+2012 FIGURE DASH: not included in any glyphset definition
- U+2015 HORIZONTAL BAR: try adding adlam
- U+2021 DOUBLE DAGGER: try adding adlam
- U+2030 PER MILLE SIGN: try adding adlam
- U+2031 PER TEN THOUSAND SIGN: not included in any glyphset definition
- U+203D INTERROBANG: not included in any glyphset definition
- U+203E OVERLINE: not included in any glyphset definition
- U+2116 NUMERO SIGN: try adding cyrillic
- U+F8E8 : not included in any glyphset definition
- U+F8E9 : not included in any glyphset definition
- U+FB01 LATIN SMALL LIGATURE FI: not included in any glyphset definition
- U+FB02 LATIN SMALL LIGATURE FL: not included in any glyphset definition
Or you can add the above codepoints to one of the subsets supported by the font: latin, latin-ext, math, menu, symbols
[code: unreachable-subsetting]

⚠️ BodoniModaSC[opsz,wght].ttf

⚠️ WARN
The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
- U+02D8 BREVE: try adding one of: yi, canadian-aboriginal
- U+02D9 DOT ABOVE: try adding one of: yi, canadian-aboriginal
- U+02DB OGONEK: try adding one of: yi, canadian-aboriginal
- U+0306 COMBINING BREVE: try adding one of: old-permic, tifinagh
- U+030A COMBINING RING ABOVE: try adding one of: syriac, duployan
- U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: osage, cherokee
- U+030C COMBINING CARON: try adding one of: cherokee, tai-le
- U+0311 COMBINING INVERTED BREVE: try adding one of: todhri, coptic
- U+0328 COMBINING OGONEK: not included in any glyphset definition
- U+2000 EN QUAD: try adding symbols2
- U+2001 EM QUAD: try adding symbols2
- U+2003 EM SPACE: try adding nushu
- U+2004 THREE-PER-EM SPACE: try adding symbols2
- U+2005 FOUR-PER-EM SPACE: try adding symbols2
- U+2006 SIX-PER-EM SPACE: try adding symbols2
- U+2007 FIGURE SPACE: try adding symbols2
- U+2008 PUNCTUATION SPACE: try adding symbols2
- U+200A HAIR SPACE: try adding symbols2
- U+2010 HYPHEN: try adding one of: lisu, sundanese, kaithi, kayah-li, syloti-nagri, armenian, yi, sora-sompeng, arabic, kharoshthi, hebrew, cham, coptic
- U+2011 NON-BREAKING HYPHEN: try adding one of: yi, syloti-nagri, arabic
- U+2012 FIGURE DASH: not included in any glyphset definition
- U+2015 HORIZONTAL BAR: try adding adlam
- U+2021 DOUBLE DAGGER: try adding adlam
- U+2030 PER MILLE SIGN: try adding adlam
- U+2031 PER TEN THOUSAND SIGN: not included in any glyphset definition
- U+203D INTERROBANG: not included in any glyphset definition
- U+203E OVERLINE: not included in any glyphset definition
- U+2116 NUMERO SIGN: try adding cyrillic
- U+F8E8 : not included in any glyphset definition
- U+F8E9 : not included in any glyphset definition
- U+FB01 LATIN SMALL LIGATURE FI: not included in any glyphset definition
- U+FB02 LATIN SMALL LIGATURE FL: not included in any glyphset definition
Or you can add the above codepoints to one of the subsets supported by the font: latin, latin-ext, math, menu, symbols
[code: unreachable-subsetting]

Glyphset Checks

💥💥

Shapes languages in all GF glyphsets.

Check ID: <FontBakeryCheck:googlefonts/glyphsets/shape_languages>

💥 BodoniModaSC-Italic[opsz,wght].ttf

💥 ERROR

Failed with ModuleNotFoundError: No module named 'shaperglot.checker'

  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checkrunner.py", line 222, in _run_check
    subresults = list(subresults)
  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checks/vendorspecific/googlefonts/glyphsets/shape_languages.py", line 19, in check_glyphsets_shape_languages
    from shaperglot.checker import Checker

[code: failed-check]

💥 BodoniModaSC[opsz,wght].ttf

💥 ERROR

Failed with ModuleNotFoundError: No module named 'shaperglot.checker'

  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checkrunner.py", line 222, in _run_check
    subresults = list(subresults)
  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checks/vendorspecific/googlefonts/glyphsets/shape_languages.py", line 19, in check_glyphsets_shape_languages
    from shaperglot.checker import Checker

[code: failed-check]

Description Checks

🔥⚠️⚠️ℹ️ℹ️ℹ️ℹ️

DESCRIPTION.en_us.html should end in a linebreak.

Check ID: <FontBakeryCheck:googlefonts/description/eof_linebreak>

⚠️ METADATA.pb

⚠️ WARN
The last characther on DESCRIPTION.en_us.html is not a line-break. Please add it.
[code: missing-eof-linebreak]

On a family update, the DESCRIPTION.en_us.html file should ideally also be updated.

Check ID: <FontBakeryCheck:googlefonts/description/family_update>

⚠️ BodoniModaSC-Italic[opsz,wght].ttf

⚠️ WARN
The DESCRIPTION.en_us.html file in this family has not changed in comparison to the latest font release on the google/fonts github repo. Please consider mentioning note-worthy improvements made to the family recently.
[code: description-not-updated]

DESCRIPTION.en_us.html must have more than 200 bytes.

Check ID: <FontBakeryCheck:googlefonts/description/min_length>

🔥 METADATA.pb

🔥 FAIL
DESCRIPTION.en_us.html must have size larger than 200 bytes.
[code: too-short]

Shaping Checks

💥💥⚠️⚠️⏩⏩⏩⏩⏩⏩

Ensure dotted circle glyph is present and can attach marks.

Check ID: <FontBakeryCheck:dotted_circle>

⚠️ BodoniModaSC-Italic[opsz,wght].ttf

⚠️ WARN
No dotted circle glyph present
[code: missing-dotted-circle]

⚠️ BodoniModaSC[opsz,wght].ttf

⚠️ WARN
No dotted circle glyph present
[code: missing-dotted-circle]

Ensure soft_dotted characters lose their dot when combined with marks that replace the dot.

Check ID: <FontBakeryCheck:soft_dotted>

💥 BodoniModaSC-Italic[opsz,wght].ttf

💥 ERROR

Failed with ModuleNotFoundError: No module named 'shaperglot.checker'

  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checkrunner.py", line 222, in _run_check
    subresults = list(subresults)
  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checks/soft_dotted.py", line 144, in check_soft_dotted
    from shaperglot.checker import Checker

[code: failed-check]

💥 BodoniModaSC[opsz,wght].ttf

💥 ERROR

Failed with ModuleNotFoundError: No module named 'shaperglot.checker'

  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checkrunner.py", line 222, in _run_check
    subresults = list(subresults)
  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checks/soft_dotted.py", line 144, in check_soft_dotted
    from shaperglot.checker import Checker

[code: failed-check]

Outline Checks

💥⚠️⚠️⏩⏩⏩⏩⏩⏩⏩⏩

Are there any misaligned on-curve points?

Check ID: <FontBakeryCheck:outline_alignment_miss>

⚠️ BodoniModaSC-Italic[opsz,wght].ttf

⚠️ WARN

The following glyphs have on-curve points which have potentially incorrect y coordinates:

* K (U+004B): X=1246.0,Y=1498.0 (should be at cap-height 1500?)

* K (U+004B): X=1302.0,Y=1498.0 (should be at cap-height 1500?)

* uni0136 (U+0136): X=1246.0,Y=1498.0 (should be at cap-height 1500?)

* uni0136 (U+0136): X=1302.0,Y=1498.0 (should be at cap-height 1500?)

* ae (U+00E6): X=191.5,Y=0.5 (should be at baseline 0?)

* k (U+006B): X=906.0,Y=921.0 (should be at x-height 920?)

* germandbls (U+00DF): X=1149.5,Y=1499.5 (should be at cap-height 1500?)

* t (U+0074): X=176.0,Y=-0.5 (should be at baseline 0?)

* tbar (U+0167): X=176.0,Y=-0.5 (should be at baseline 0?)

* tcaron (U+0165): X=176.0,Y=-0.5 (should be at baseline 0?)

* uni0163 (U+0163): X=176.0,Y=-0.5 (should be at baseline 0?)

* uni021B (U+021B): X=176.0,Y=-0.5 (should be at baseline 0?)

* v (U+0076): X=237.0,Y=918.0 (should be at x-height 920?)

* v (U+0076): X=851.0,Y=918.5 (should be at x-height 920?)

* w (U+0077): X=749.0,Y=-0.5 (should be at baseline 0?)

* wacute (U+1E83): X=749.0,Y=-0.5 (should be at baseline 0?)

* wcircumflex (U+0175): X=749.0,Y=-0.5 (should be at baseline 0?)

* wdieresis (U+1E85): X=749.0,Y=-0.5 (should be at baseline 0?)

* uni1E87 (U+1E87): X=749.0,Y=-0.5 (should be at baseline 0?)

* uni1E89 (U+1E89): X=749.0,Y=-0.5 (should be at baseline 0?)

* wgrave (U+1E81): X=749.0,Y=-0.5 (should be at baseline 0?)

* x (U+0078): X=-2.0,Y=2.0 (should be at baseline 0?)

* y (U+0079): X=977.5,Y=921.0 (should be at x-height 920?)

* f_f_i: X=1492.0,Y=1501.5 (should be at cap-height 1500?)

* fi (U+FB01): X=938.0,Y=1501.5 (should be at cap-height 1500?)

* aring.sc: X=544.5,Y=1498.0 (should be at cap-height 1500?)

* aring.sc: X=800.5,Y=1498.0 (should be at cap-height 1500?)

* ccedilla.sc: X=431.0,Y=2.0 (should be at baseline 0?)

* ccedilla.sc: X=479.0,Y=2.0 (should be at baseline 0?)

* scedilla.sc: X=320.0,Y=2.0 (should be at baseline 0?)

* scedilla.sc: X=368.0,Y=2.0 (should be at baseline 0?)

* ordmasculine (U+00BA): X=815.0,Y=1502.0 (should be at cap-height 1500?)

* uni03BC (U+03BC): X=153.0,Y=0.5 (should be at baseline 0?)

* pi (U+03C0): X=722.0,Y=-0.5 (should be at baseline 0?)

* question (U+003F): X=935.0,Y=1498.0 (should be at cap-height 1500?)

* uni203D (U+203D): X=933.5,Y=1500.5 (should be at cap-height 1500?)

* section (U+00A7): X=533.5,Y=1498.5 (should be at cap-height 1500?)

* trademark (U+2122): X=912.0,Y=1501.0 (should be at cap-height 1500?)

* trademark (U+2122): X=860.0,Y=1501.0 (should be at cap-height 1500?)

* trademark (U+2122): X=1434.0,Y=1501.0 (should be at cap-height 1500?)

* trademark (U+2122): X=1388.0,Y=1501.0 (should be at cap-height 1500?)

* trademark (U+2122): X=538.0,Y=1501.0 (should be at cap-height 1500?)

* trademark (U+2122): X=466.0,Y=1501.0 (should be at cap-height 1500?)

* trademark (U+2122): X=678.0,Y=1501.0 (should be at cap-height 1500?)

* trademark (U+2122): X=607.0,Y=1501.0 (should be at cap-height 1500?)

* dollar (U+0024): X=325.0,Y=2.0 (should be at baseline 0?)

* dollar (U+0024): X=735.0,Y=2.0 (should be at baseline 0?)

* plusminus (U+00B1): X=120.0,Y=2.0 (should be at baseline 0?)

* plusminus (U+00B1): X=940.0,Y=2.0 (should be at baseline 0?)

* plusminus (U+00B1): X=120.0,Y=2.0 (should be at baseline 0?)

* uni00B5 (U+00B5): X=153.0,Y=0.5 (should be at baseline 0?)

[code: found-misalignments]

💥 BodoniModaSC[opsz,wght].ttf

💥 ERROR

Failed with IndexError: list index out of range

  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checkrunner.py", line 222, in _run_check
    subresults = list(subresults)
  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checks/outline_alignment_miss.py", line 61, in check_outline_alignment_miss
    for node in p.asNodelist():
                ~~~~~~~~~~~~^^
  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/beziers/path/__init__.py", line 150, in asNodelist
    nl = self.activeRepresentation.toNodelist()
  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/beziers/path/representations/Segment.py", line 23, in toNodelist
    first = self.segments[0][0]
            ~~~~~~~~~~~~~^^^

[code: failed-check]

Check the direction of the outermost contour in each glyph

Check ID: <FontBakeryCheck:outline_direction>

⚠️ BodoniModaSC[opsz,wght].ttf

⚠️ WARN

The following glyphs have a counter-clockwise outer contour:

* OE (U+0152) has a counter-clockwise outer contour

* OE (U+0152) has a counter-clockwise outer contour

* OE (U+0152) has a path with no bounds (probably a single point)

* oe.sc has a counter-clockwise outer contour

* uni2116 (U+2116) has a counter-clockwise outer contour

[code: ccw-outer-contour]

Font File Checks

⚠️⚠️⏩⏩⏩⏩⏩⏩⏩⏩ℹ️ℹ️ℹ️ℹ️ℹ️

Ensure fonts have ScriptLangTags declared on the 'meta' table.

Check ID: <FontBakeryCheck:googlefonts/meta/script_lang_tags>

⚠️ BodoniModaSC-Italic[opsz,wght].ttf

⚠️ WARN
This font file does not have a 'meta' table.
[code: lacks-meta-table]

⚠️ BodoniModaSC[opsz,wght].ttf

⚠️ WARN
This font file does not have a 'meta' table.
[code: lacks-meta-table]