FontBakery Check Report

If you think a check is flawed or have an idea for a check, please file an issue at https://github.com/fonttools/fontbakery/issues and remember to include a pointer to the repo and branch you're checking.

DEPRECATION WARNING

By late-December 2024, FontBakery version 0.13.0 introduced a new naming scheme for the check-IDs.

Fontbakery detected usage of old IDs and performed an automatic backwards-compatibility translation for you.
This automatic translation will be deprecated in the next major release.

Please start using the new check-IDs as documented at /Lib/fontbakery/legacy_checkids.py

The following legacy check-IDs were detected:
- com.google.fonts/check/outline_jaggy_segments
- com.google.fonts/check/outline_semi_vertical
- com.google.fonts/check/version_bump
- com.google.fonts/check/outline_colinear_vectors
- com.google.fonts/check/outline_alignment_miss
- com.google.fonts/check/outline_short_segments
- com.google.fonts/check/fontdata_namecheck
- com.google.fonts/check/ttx_roundtrip

Summary

💥 ERROR	☠ FATAL	🔥 FAIL	⚠️ WARN	⏩ SKIP	ℹ️ INFO	✅ PASS
4	0	5	13	81	13	341
1%	0%	1%	3%	18%	3%	75%

Meaning of check results:

💥 An ERROR is something wrong with FontBakery itself, possibly a bug.
☠ A FATAL is an extremely severe issue that must be addressed immediately.
🔥 A FAIL is a problem with the font that must be fixed.
⚠️ A WARN is something that you should consider addressing.
ℹ️ An INFO result simply prints something useful. Typically stats.
✅ A PASS means the font looks good for the given checking routine.
⏩ And a SKIP happens when the check does not apply to the given font.

If you get ERRORs, please help us improve the tool by reporting them at our issue tracker.

(but other kinds of bug reports and/or feature requests are also always welcome, of course!)

FontBakery version: 0.13.1

Universal Profile Checks

🔥🔥⚠️⚠️⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩ℹ️ℹ️ℹ️ℹ️

Check math signs have the same width.

Check ID: <FontBakeryCheck:math_signs_width>

⚠️ AtkinsonHyperlegibleNext-Italic[wght].ttf

⚠️ WARN
The most common width is 606 among a set of 3 math glyphs. The following math glyphs have a different width, though:

Width = 553: less, greater

Width = 628: notequal, equal

Width = 602: logicalnot

Width = 579: plusminus, lessequal, greaterequal

Width = 531: multiply

Width = 554: approxequal
[code: width-outliers]

⚠️ AtkinsonHyperlegibleNext[wght].ttf

⚠️ WARN
The most common width is 606 among a set of 3 math glyphs. The following math glyphs have a different width, though:

Width = 553: less, greater

Width = 628: notequal, equal

Width = 602: logicalnot

Width = 579: plusminus, lessequal, greaterequal

Width = 532: multiply

Width = 554: approxequal
[code: width-outliers]

Combined length of family and style must not exceed 32 characters.

Check ID: <FontBakeryCheck:name/family_and_style_max_length>

🔥 AtkinsonHyperlegibleNext-Italic[wght].ttf

⚠️ WARN
Name ID 6 'AtkinsonHyperlegibleNext-Italic' exceeds 27 characters. This has been found to cause problems with PostScript printers, especially on Mac platforms.
[code: nameid6-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next ExtraLight Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 257 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next ExtraLight Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 257 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next Light Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 258 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next Light Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 258 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 259 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 259 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next Medium Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 260 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next Medium Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 260 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next SemiBold Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 261 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next SemiBold Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 261 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next Bold Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 262 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next Bold Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 262 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next ExtraBold Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 263 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next ExtraBold Italic' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 263 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]

🔥 AtkinsonHyperlegibleNext[wght].ttf

⚠️ WARN
Name ID 6 'AtkinsonHyperlegibleNext-Regular' exceeds 27 characters. This has been found to cause problems with PostScript printers, especially on Mac platforms.
[code: nameid6-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next ExtraLight' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 257 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next ExtraLight' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 257 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next Regular' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 259 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next Regular' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 259 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next Medium' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 260 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next Medium' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 260 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next SemiBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 261 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next SemiBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 261 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next ExtraBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 263 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]
🔥 FAIL
Variable font instance name 'Atkinson Hyperlegible Next ExtraBold' formed by space-separated concatenation of font family name (nameID 1) and instance subfamily nameID 263 exceeds 32 characters.

This has been found to cause shaping issues for some accented letters in Microsoft Word on Windows 10 and 11.
[code: instance-too-long]

Metadata Checks

🔥🔥⚠️⚠️⏩⏩⏩⏩⏩⏩ℹ️ℹ️

Does METADATA.pb copyright field contain broken links?

Check ID: <FontBakeryCheck:googlefonts/metadata/broken_links>

🔥 AtkinsonHyperlegibleNext-Italic[wght].ttf

🔥 FAIL
The following links are broken in the METADATA.pb file: https://github.com/googlefonts/atkinson-hyperlegible-next (status code: 404)
[code: broken-links]

🔥 AtkinsonHyperlegibleNext[wght].ttf

🔥 FAIL
The following links are broken in the METADATA.pb file: https://github.com/googlefonts/atkinson-hyperlegible-next (status code: 404)
[code: broken-links]

Check for codepoints not covered by METADATA subsets.

Check ID: <FontBakeryCheck:googlefonts/metadata/unreachable_subsetting>

⚠️ AtkinsonHyperlegibleNext-Italic[wght].ttf

⚠️ WARN
The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
- U+02D8 BREVE: try adding one of: yi, canadian-aboriginal
- U+02D9 DOT ABOVE: try adding one of: yi, canadian-aboriginal
- U+02DB OGONEK: try adding one of: yi, canadian-aboriginal
- U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: cherokee, math, tifinagh, coptic
- U+0306 COMBINING BREVE: try adding one of: tifinagh, old-permic
- U+0307 COMBINING DOT ABOVE: try adding one of: malayalam, hebrew, syriac, canadian-aboriginal, tai-le, duployan, math, old-permic, tifinagh, coptic, todhri
- U+030A COMBINING RING ABOVE: try adding one of: duployan, syriac
- U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: cherokee, osage
- U+030C COMBINING CARON: try adding one of: cherokee, tai-le
- U+0312 COMBINING TURNED COMMA ABOVE: try adding math
- U+0326 COMBINING COMMA BELOW: try adding math
- U+0327 COMBINING CEDILLA: try adding math
- U+0328 COMBINING OGONEK: not included in any glyphset definition
- U+0394 GREEK CAPITAL LETTER DELTA: try adding one of: greek, math, elbasan
- U+03A9 GREEK CAPITAL LETTER OMEGA: try adding one of: greek, math, elbasan
- U+03BC GREEK SMALL LETTER MU: try adding one of: greek, math
- U+03C0 GREEK SMALL LETTER PI: try adding one of: greek, math, yi
- U+2021 DOUBLE DAGGER: try adding adlam
- U+2030 PER MILLE SIGN: try adding adlam
- U+212E ESTIMATED SYMBOL: try adding math
- U+2202 PARTIAL DIFFERENTIAL: try adding math
- U+220F N-ARY PRODUCT: try adding math
- U+2211 N-ARY SUMMATION: try adding math
- U+2219 BULLET OPERATOR: try adding one of: tai-tham, math, yi, symbols
- U+221A SQUARE ROOT: try adding math
- U+221E INFINITY: try adding math
- U+222B INTEGRAL: try adding math
- U+2248 ALMOST EQUAL TO: try adding math
- U+2260 NOT EQUAL TO: try adding math
- U+2264 LESS-THAN OR EQUAL TO: try adding math
- U+2265 GREATER-THAN OR EQUAL TO: try adding math
- U+25CA LOZENGE: try adding one of: math, symbols
- U+266A EIGHTH NOTE: try adding one of: music, symbols
Or you can add the above codepoints to one of the subsets supported by the font: latin, latin-ext, menu
[code: unreachable-subsetting]

⚠️ AtkinsonHyperlegibleNext[wght].ttf

⚠️ WARN
The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
- U+02D8 BREVE: try adding one of: yi, canadian-aboriginal
- U+02D9 DOT ABOVE: try adding one of: yi, canadian-aboriginal
- U+02DB OGONEK: try adding one of: yi, canadian-aboriginal
- U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: cherokee, math, tifinagh, coptic
- U+0306 COMBINING BREVE: try adding one of: tifinagh, old-permic
- U+0307 COMBINING DOT ABOVE: try adding one of: malayalam, hebrew, syriac, canadian-aboriginal, tai-le, duployan, math, old-permic, tifinagh, coptic, todhri
- U+030A COMBINING RING ABOVE: try adding one of: duployan, syriac
- U+030B COMBINING DOUBLE ACUTE ACCENT: try adding one of: cherokee, osage
- U+030C COMBINING CARON: try adding one of: cherokee, tai-le
- U+0312 COMBINING TURNED COMMA ABOVE: try adding math
- U+0326 COMBINING COMMA BELOW: try adding math
- U+0327 COMBINING CEDILLA: try adding math
- U+0328 COMBINING OGONEK: not included in any glyphset definition
- U+0394 GREEK CAPITAL LETTER DELTA: try adding one of: greek, math, elbasan
- U+03A9 GREEK CAPITAL LETTER OMEGA: try adding one of: greek, math, elbasan
- U+03BC GREEK SMALL LETTER MU: try adding one of: greek, math
- U+03C0 GREEK SMALL LETTER PI: try adding one of: greek, math, yi
- U+2021 DOUBLE DAGGER: try adding adlam
- U+2030 PER MILLE SIGN: try adding adlam
- U+212E ESTIMATED SYMBOL: try adding math
- U+2202 PARTIAL DIFFERENTIAL: try adding math
- U+220F N-ARY PRODUCT: try adding math
- U+2211 N-ARY SUMMATION: try adding math
- U+2219 BULLET OPERATOR: try adding one of: tai-tham, math, yi, symbols
- U+221A SQUARE ROOT: try adding math
- U+221E INFINITY: try adding math
- U+222B INTEGRAL: try adding math
- U+2248 ALMOST EQUAL TO: try adding math
- U+2260 NOT EQUAL TO: try adding math
- U+2264 LESS-THAN OR EQUAL TO: try adding math
- U+2265 GREATER-THAN OR EQUAL TO: try adding math
- U+25CA LOZENGE: try adding one of: math, symbols
- U+266A EIGHTH NOTE: try adding one of: music, symbols
Or you can add the above codepoints to one of the subsets supported by the font: latin, latin-ext, menu
[code: unreachable-subsetting]

Glyphset Checks

💥💥

Shapes languages in all GF glyphsets.

Check ID: <FontBakeryCheck:googlefonts/glyphsets/shape_languages>

💥 AtkinsonHyperlegibleNext-Italic[wght].ttf

💥 ERROR

Failed with ModuleNotFoundError: No module named 'shaperglot.checker'

  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checkrunner.py", line 222, in _run_check
    subresults = list(subresults)
  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checks/vendorspecific/googlefonts/glyphsets/shape_languages.py", line 19, in check_glyphsets_shape_languages
    from shaperglot.checker import Checker

[code: failed-check]

💥 AtkinsonHyperlegibleNext[wght].ttf

💥 ERROR

Failed with ModuleNotFoundError: No module named 'shaperglot.checker'

  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checkrunner.py", line 222, in _run_check
    subresults = list(subresults)
  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checks/vendorspecific/googlefonts/glyphsets/shape_languages.py", line 19, in check_glyphsets_shape_languages
    from shaperglot.checker import Checker

[code: failed-check]

Description Checks

🔥⚠️⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩

DESCRIPTION.en_us.html should end in a linebreak.

Check ID: <FontBakeryCheck:googlefonts/description/eof_linebreak>

⚠️ METADATA.pb

⚠️ WARN
The last characther on DESCRIPTION.en_us.html is not a line-break. Please add it.
[code: missing-eof-linebreak]

DESCRIPTION.en_us.html must have more than 200 bytes.

Check ID: <FontBakeryCheck:googlefonts/description/min_length>

🔥 METADATA.pb

🔥 FAIL
DESCRIPTION.en_us.html must have size larger than 200 bytes.
[code: too-short]

Shaping Checks

💥💥⚠️⚠️⏩⏩⏩⏩⏩⏩

Ensure dotted circle glyph is present and can attach marks.

Check ID: <FontBakeryCheck:dotted_circle>

⚠️ AtkinsonHyperlegibleNext-Italic[wght].ttf

⚠️ WARN
No dotted circle glyph present
[code: missing-dotted-circle]

⚠️ AtkinsonHyperlegibleNext[wght].ttf

⚠️ WARN
No dotted circle glyph present
[code: missing-dotted-circle]

Ensure soft_dotted characters lose their dot when combined with marks that replace the dot.

Check ID: <FontBakeryCheck:soft_dotted>

💥 AtkinsonHyperlegibleNext-Italic[wght].ttf

💥 ERROR

Failed with ModuleNotFoundError: No module named 'shaperglot.checker'

  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checkrunner.py", line 222, in _run_check
    subresults = list(subresults)
  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checks/soft_dotted.py", line 144, in check_soft_dotted
    from shaperglot.checker import Checker

[code: failed-check]

💥 AtkinsonHyperlegibleNext[wght].ttf

💥 ERROR

Failed with ModuleNotFoundError: No module named 'shaperglot.checker'

  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checkrunner.py", line 222, in _run_check
    subresults = list(subresults)
  File "/Users/simon/work/gf-dashboard/venv/lib/python3.13/site-packages/fontbakery/checks/soft_dotted.py", line 144, in check_soft_dotted
    from shaperglot.checker import Checker

[code: failed-check]

Outline Checks

⚠️⚠️⏩⏩⏩⏩⏩⏩⏩⏩

Are there any misaligned on-curve points?

Check ID: <FontBakeryCheck:outline_alignment_miss>

⚠️ AtkinsonHyperlegibleNext-Italic[wght].ttf

⚠️ WARN

The following glyphs have on-curve points which have potentially incorrect y coordinates:

* Aring (U+00C5): X=507.0,Y=669.0 (should be at cap-height 668?)

* S (U+0053): X=262.5,Y=666.5 (should be at cap-height 668?)

* S (U+0053): X=452.5,Y=666.0 (should be at cap-height 668?)

* Sacute (U+015A): X=262.5,Y=666.5 (should be at cap-height 668?)

* Sacute (U+015A): X=452.5,Y=666.0 (should be at cap-height 668?)

* Scaron (U+0160): X=262.5,Y=666.5 (should be at cap-height 668?)

* Scaron (U+0160): X=452.5,Y=666.0 (should be at cap-height 668?)

* Scedilla (U+015E): X=262.5,Y=666.5 (should be at cap-height 668?)

* Scedilla (U+015E): X=452.5,Y=666.0 (should be at cap-height 668?)

* uni0218 (U+0218): X=262.5,Y=666.5 (should be at cap-height 668?)

* uni0218 (U+0218): X=452.5,Y=666.0 (should be at cap-height 668?)

* U (U+0055): X=232.0,Y=-1.5 (should be at baseline 0?)

* Uacute (U+00DA): X=232.0,Y=-1.5 (should be at baseline 0?)

* Ucircumflex (U+00DB): X=232.0,Y=-1.5 (should be at baseline 0?)

* Udieresis (U+00DC): X=232.0,Y=-1.5 (should be at baseline 0?)

* Ugrave (U+00D9): X=232.0,Y=-1.5 (should be at baseline 0?)

* Uhungarumlaut (U+0170): X=232.0,Y=-1.5 (should be at baseline 0?)

* Umacron (U+016A): X=232.0,Y=-1.5 (should be at baseline 0?)

* Uogonek (U+0172): X=230.0,Y=-1.5 (should be at baseline 0?)

* Uring (U+016E): X=438.0,Y=670.0 (should be at cap-height 668?)

* Uring (U+016E): X=438.0,Y=670.0 (should be at cap-height 668?)

* Uring (U+016E): X=232.0,Y=-1.5 (should be at baseline 0?)

* a (U+0061): X=87.0,Y=2.0 (should be at baseline 0?)

* aacute (U+00E1): X=87.0,Y=2.0 (should be at baseline 0?)

* abreve (U+0103): X=87.0,Y=2.0 (should be at baseline 0?)

* acircumflex (U+00E2): X=87.0,Y=2.0 (should be at baseline 0?)

* adieresis (U+00E4): X=87.0,Y=2.0 (should be at baseline 0?)

* agrave (U+00E0): X=87.0,Y=2.0 (should be at baseline 0?)

* amacron (U+0101): X=87.0,Y=2.0 (should be at baseline 0?)

* aogonek (U+0105): X=87.0,Y=2.0 (should be at baseline 0?)

* aring (U+00E5): X=87.0,Y=2.0 (should be at baseline 0?)

* atilde (U+00E3): X=87.0,Y=2.0 (should be at baseline 0?)

* ae (U+00E6): X=88.0,Y=2.0 (should be at baseline 0?)

* dcaron (U+010F): X=741.0,Y=666.0 (should be at cap-height 668?)

* g (U+0067): X=344.0,Y=495.5 (should be at x-height 496?)

* lcaron (U+013E): X=399.0,Y=667.0 (should be at cap-height 668?)

* s (U+0073): X=343.0,Y=494.5 (should be at x-height 496?)

* uni0163 (U+0163): X=168.0,Y=1.0 (should be at baseline 0?)

* exclamdown (U+00A1): X=47.0,Y=2.0 (should be at baseline 0?)

* exclamdown (U+00A1): X=137.0,Y=2.0 (should be at baseline 0?)

* ampersand (U+0026): X=490.5,Y=667.0 (should be at cap-height 668?)

* uni2113 (U+2113): X=287.5,Y=-1.5 (should be at baseline 0?)

* dollar (U+0024): X=262.5,Y=666.0 (should be at cap-height 668?)

* Euro (U+20AC): X=446.5,Y=1.5 (should be at baseline 0?)

* greater (U+003E): X=-13.0,Y=1.0 (should be at baseline 0?)

* greater (U+003E): X=-13.0,Y=1.0 (should be at baseline 0?)

* less (U+003C): X=460.0,Y=1.0 (should be at baseline 0?)

* less (U+003C): X=460.0,Y=1.0 (should be at baseline 0?)

* three (U+0033): X=422.0,Y=670.0 (should be at cap-height 668?)

* eight (U+0038): X=200.5,Y=-0.5 (should be at baseline 0?)

* three.tf: X=464.0,Y=670.0 (should be at cap-height 668?)

* eight.tf: X=208.5,Y=-0.5 (should be at baseline 0?)

* threequarters (U+00BE): X=325.0,Y=668.5 (should be at cap-height 668?)

[code: found-misalignments]

⚠️ AtkinsonHyperlegibleNext[wght].ttf

⚠️ WARN

The following glyphs have on-curve points which have potentially incorrect y coordinates:

* Aogonek (U+0104): X=515.0,Y=2.0 (should be at baseline 0?)

* Aogonek (U+0104): X=515.0,Y=2.0 (should be at baseline 0?)

* S (U+0053): X=202.5,Y=666.5 (should be at cap-height 668?)

* S (U+0053): X=392.0,Y=666.5 (should be at cap-height 668?)

* Sacute (U+015A): X=202.5,Y=666.5 (should be at cap-height 668?)

* Sacute (U+015A): X=392.0,Y=666.5 (should be at cap-height 668?)

* Scaron (U+0160): X=202.5,Y=666.5 (should be at cap-height 668?)

* Scaron (U+0160): X=392.0,Y=666.5 (should be at cap-height 668?)

* Scedilla (U+015E): X=202.5,Y=666.5 (should be at cap-height 668?)

* Scedilla (U+015E): X=392.0,Y=666.5 (should be at cap-height 668?)

* uni0218 (U+0218): X=202.5,Y=666.5 (should be at cap-height 668?)

* uni0218 (U+0218): X=392.0,Y=666.5 (should be at cap-height 668?)

* Uring (U+016E): X=345.0,Y=670.0 (should be at cap-height 668?)

* Uring (U+016E): X=345.0,Y=670.0 (should be at cap-height 668?)

* aacute (U+00E1): X=390.0,Y=670.0 (should be at cap-height 668?)

* agrave (U+00E0): X=126.0,Y=670.0 (should be at cap-height 668?)

* b (U+0062): X=247.5,Y=-1.5 (should be at baseline 0?)

* cacute (U+0107): X=404.0,Y=670.0 (should be at cap-height 668?)

* dcaron (U+010F): X=651.5,Y=667.5 (should be at cap-height 668?)

* eacute (U+00E9): X=413.0,Y=670.0 (should be at cap-height 668?)

* egrave (U+00E8): X=149.0,Y=670.0 (should be at cap-height 668?)

* uni0123 (U+0123): X=215.0,Y=666.0 (should be at cap-height 668?)

* uni0123 (U+0123): X=281.0,Y=670.0 (should be at cap-height 668?)

* iacute (U+00ED): X=260.0,Y=670.0 (should be at cap-height 668?)

* igrave (U+00EC): X=-4.0,Y=670.0 (should be at cap-height 668?)

* ij (U+0133): X=423.0,Y=-1.0 (should be at baseline 0?)

* j (U+006A): X=171.0,Y=-1.0 (should be at baseline 0?)

* uni0237 (U+0237): X=171.0,Y=-1.0 (should be at baseline 0?)

* uni006A0301: X=171.0,Y=-1.0 (should be at baseline 0?)

* uni006A0301: X=261.0,Y=670.0 (should be at cap-height 668?)

* lcaron (U+013E): X=309.5,Y=668.5 (should be at cap-height 668?)

* nacute (U+0144): X=407.0,Y=670.0 (should be at cap-height 668?)

* oacute (U+00F3): X=406.0,Y=670.0 (should be at cap-height 668?)

* ograve (U+00F2): X=142.0,Y=670.0 (should be at cap-height 668?)

* p (U+0070): X=247.5,Y=-1.5 (should be at baseline 0?)

* thorn (U+00FE): X=247.5,Y=-1.5 (should be at baseline 0?)

* racute (U+0155): X=335.0,Y=670.0 (should be at cap-height 668?)

* s (U+0073): X=154.5,Y=1.5 (should be at baseline 0?)

* sacute (U+015B): X=154.5,Y=1.5 (should be at baseline 0?)

* sacute (U+015B): X=368.0,Y=670.0 (should be at cap-height 668?)

* scaron (U+0161): X=154.5,Y=1.5 (should be at baseline 0?)

* uni0219 (U+0219): X=154.5,Y=1.5 (should be at baseline 0?)

* uacute (U+00FA): X=402.0,Y=670.0 (should be at cap-height 668?)

* ugrave (U+00F9): X=138.0,Y=670.0 (should be at cap-height 668?)

* wacute (U+1E83): X=474.0,Y=670.0 (should be at cap-height 668?)

* wgrave (U+1E81): X=210.0,Y=670.0 (should be at cap-height 668?)

* y (U+0079): X=189.0,Y=-1.0 (should be at baseline 0?)

* yacute (U+00FD): X=189.0,Y=-1.0 (should be at baseline 0?)

* yacute (U+00FD): X=357.0,Y=670.0 (should be at cap-height 668?)

* ycircumflex (U+0177): X=189.0,Y=-1.0 (should be at baseline 0?)

* ydieresis (U+00FF): X=189.0,Y=-1.0 (should be at baseline 0?)

* ygrave (U+1EF3): X=189.0,Y=-1.0 (should be at baseline 0?)

* ygrave (U+1EF3): X=93.0,Y=670.0 (should be at cap-height 668?)

* zacute (U+017A): X=362.0,Y=670.0 (should be at cap-height 668?)

* ordfeminine (U+00AA): X=110.5,Y=670.0 (should be at cap-height 668?)

* uni03BC (U+03BC): X=200.0,Y=2.0 (should be at baseline 0?)

* exclamdown (U+00A1): X=98.0,Y=2.0 (should be at baseline 0?)

* exclamdown (U+00A1): X=188.0,Y=2.0 (should be at baseline 0?)

* at (U+0040): X=532.0,Y=1.0 (should be at baseline 0?)

* ampersand (U+0026): X=420.5,Y=666.0 (should be at cap-height 668?)

* gravecomb (U+0300): X=40.0,Y=670.0 (should be at cap-height 668?)

* acutecomb (U+0301): X=203.0,Y=670.0 (should be at cap-height 668?)

* uni030C.alt: X=137.5,Y=666.5 (should be at cap-height 668?)

* uni0312 (U+0312): X=40.0,Y=666.0 (should be at cap-height 668?)

* uni0312 (U+0312): X=106.0,Y=670.0 (should be at cap-height 668?)

* grave (U+0060): X=40.0,Y=670.0 (should be at cap-height 668?)

* acute (U+00B4): X=203.0,Y=670.0 (should be at cap-height 668?)

* three (U+0033): X=362.5,Y=670.0 (should be at cap-height 668?)

* three.tf: X=404.5,Y=670.0 (should be at cap-height 668?)

* threequarters (U+00BE): X=254.0,Y=668.5 (should be at cap-height 668?)

[code: found-misalignments]

Font File Checks

⚠️⚠️⚠️⚠️⏩⏩⏩⏩⏩⏩⏩⏩⏩⏩ℹ️ℹ️ℹ️ℹ️ℹ️

Ensure fonts have ScriptLangTags declared on the 'meta' table.

Check ID: <FontBakeryCheck:googlefonts/meta/script_lang_tags>

⚠️ AtkinsonHyperlegibleNext-Italic[wght].ttf

⚠️ WARN
This font file does not have a 'meta' table.
[code: lacks-meta-table]

⚠️ AtkinsonHyperlegibleNext[wght].ttf

⚠️ WARN
This font file does not have a 'meta' table.
[code: lacks-meta-table]

Checking OS/2 achVendID.

Check ID: <FontBakeryCheck:googlefonts/vendor_id>

⚠️ AtkinsonHyperlegibleNext-Italic[wght].ttf

⚠️ WARN
OS/2 VendorID value 'NONE' is not yet recognized. If you registered it recently, then it's safe to ignore this warning message. Otherwise, you should set it to your own unique 4 character code, and register it with Microsoft at https://www.microsoft.com/typography/links/vendorlist.aspx
[code: unknown]

⚠️ AtkinsonHyperlegibleNext[wght].ttf

⚠️ WARN
OS/2 VendorID value 'NONE' is not yet recognized. If you registered it recently, then it's safe to ignore this warning message. Otherwise, you should set it to your own unique 4 character code, and register it with Microsoft at https://www.microsoft.com/typography/links/vendorlist.aspx
[code: unknown]